🔝 Elevate Your Keyboard Game!
The Gateron Switch Puller V2 is an essential DIY tool for mechanical keyboard enthusiasts, designed for effortless switch customization. Made from durable aluminum alloy with an ergonomic design, it ensures a seamless experience while maintaining compatibility with most detachable switch keyboards. With an IP65 rating, this tool is built to last, making it a must-have for any serious gamer or typist.
Specification Met | Ip65 |
International Protection Rating | IP65 |
Terminal | Physical |
Control Method | Touch |
Operation Mode | manual |
Switch Type | Push Button |
Contact Type | Normally Closed |
Connectivity Protocol | X-10 |
Actuator Type | Push Button |
Mounting Type | Plug-In Mount |
Connector Type | Plug In |
Color | Black |
Material Type | Aluminum |
Contact Material | Aluminum |
Number of Items | 1 |
Item Dimensions | 5.12 x 0.79 x 0.79 inches |
Unit Count | 1.0 Count |
A**3
So surprisingly impressed by this
I wish I had bought this sooner. It works perfectly and it's funnnnnnnn. I was skeptical about it because other similar ones on Amazon are rated horribly, but went with this one because the ratings were slightly higher. Price is a little steep but if you're pulling switches on the regular it's totally worth it.
A**S
I should've bought this day 1
Why did you pick this product vs others?:Makes pulling switches as easy and fast as pulling keycaps. There's no reason not to get this if youre in the hobby
N**R
Better than most but still scratched my keyboard
Much better than most switch pullers. Still scratched my keyboard... Used a small piece of modeling sandpaper to smoothe it out and it was great after that.
R**L
Turns the worst part into the best
I don't swap out the switches in keyboards too often - maybe once a year or less. When I do, the worst part of the process in my opinion is pulling the actual switches out of the keyboard. It gives me the most finger fatigue and seems like part of the process most prone to breaking switches, if you put too much force on the tab or pull at the wrong angle. I was skeptical when I ran across this and felt it was probably overpriced, but was willing to splurge on the chance that it would really improve things.You can see the five stars, so you already know the answer: this thing is amazing. You loosely position it over the switch and then press down, which triggers a mechanism to close the prongs on the switch, securing it and depressing the tab. Lift up (not much force required) and the switch comes out, nicely secured to the barrel. Depress the button and the switch releases. It's nearly effortless and makes the process incredibly fast and easy. You don't need to remove all of the keycaps around the switch you're pulling, the barrel is pretty narrow and fits easily.If you plan to only swap out switches on a keyboard once and think you might never do it again in your life, just stick with the usual tweezer-style switch remover that probably came with your keyboard or switches. Once you're done and started shopping for your next keyboard, and/or find yourself reading about other switches, acknowledge that you've fallen into the rabbit hole like the rest of us and buy this. Your fingers will thank you.Fun fact: the button to release the switch is a Gateron-styled switch, itself, and the button you depress is a standard keycap that can be replaced with any MX-style keycap (although when I tested, it was tighter to remove my standard keycap than it was to remove the keycap that came with the switch puller).I can't recommend this highly enough. I only wish Amazon had stocked the versions with the red or blue barrels when I bought mine, to further add to the fun of using it.
H**N
The Best Switch Puller Hands down
If you like to switch keys and tinker, THIS IS A MUST. Pick this up this has been able to pull every Switch i tried it on. Gatreon, TTC, Everglade Etc.
J**N
Don’t do a single Keeb reswitch until you get this.
Worth the price? Do I need water to live?The only downside I’ve had is that some switch types don’t want to eject with a pop. If yours are not, rotate it 90* to check first. Oh and sure, once in awhile on a real tight keeb plate you have to attempt it more than once, but it will get it!Never again am I not using one. I could lose this one and have ten other pullers sitting around and I’d just wait on shipping for my next Gateron puller.
G**G
Do NOT buy this!!
This thing does not work half the time. and it damaged the coating on the plate the switches go into. I wish I would have listened to the other one star reviews.
S**S
what an upgrade over basic switch pullers! No more RSI
NOTE: This switch puller is meant for keyboards that have Hot Swap Sockets, or in cases where you've already desoldered the pins from the PCB, and just need to remove them from the mounting plate. If you have no idea what I'm talking about, PLEASE USE CAUTION. Don't ruin your $100 corsair keyboard by using too much force.PRO:-reduced wrist stress: 100+ key switch pulls without pain vs doing 2 rows and needing a break? Gimme this tool.-grips switch for you, so you can focus on removing delicately without damaging pins.-lots of surface area, so your hand can get a good grip while you wiggle the switch out of the socket.CON (there aren't any, I'm picking nits):-price feels steep for being fairly mechanically simple. If this were $15-20 I'd feel better than $30+-it isn't immediately obvious how to use this tool. My first impulse was to push on the key cap on top, only to feel a click. I was worried I broke something. NOPE.If it would be helpful, I can record a video of how to use this tool. Just send a comment / reply and let me know.
Trustpilot
2 weeks ago
3 weeks ago